Preparation is key to achieving flawless nails with dipping powder application. Begin by shaping your nails to your desired shape and gently pushing back the cuticles.
To ensure optimal adhesion, delicately roughen the surface of your natural nails using a buffer block or the fine side of a file. It's crucial to remove any invisible cuticle and skin debris to prevent lifting.
Avoid applying oils or creams prior to beginning the process.
Step 1: Base coat
Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.
Step 2: Ombré
Use a brush to create the ombré effect with different dipping color powders, then use the brush to brush away the excess powder.
Step 3: Activator Coat
Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.
Step 4: Activator Coat
Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.
Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.
Step 6: Top Coat
Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.
Step 7: Top Coat
Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2–3 minutes.
Leave a comment