Violet Sand + Mermaid + Crystal Clear

 

Products used:

- Glowdip starter set

- Colour: Violet Sand

- Colour: Mermaid

- Colour: Crystal Clear

Step-by-step instructions for applying "Violet Sand + Mermaid + Crystal Clear" Dipping Powder

Materials:

• Violet Sand Dipping Powder
• Mermaid Dipping Powder
• Crystal Clear Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Start by applying a thin, even layer of base coat on the pinky and pointing fingernail and dip it into "Violet Sand" dipping powder. Hold your nail at a 90-degree angle while dipping to ensure smooth and even coverage. Tap off any excess powder and use a soft brush to sweep away loose particles around the cuticle and edges.

For the rest of your nails, apply a base coat and dip each one into "Mermaid" dipping powder. Make sure to tap off excess powder and gently brush away any loose particles after each dip for a clean finish.

Once all the base colors are done, let the powder fully set. Next, wrap a tape on your finger and press down gently but firmly to ensure the dipping powder sticks well. 

Then, apply a thin layer of base coat over the entire nail and dip all nails into "Crystal Clear" dipping powder. This step seals the design and encapsulates any stickers, giving it a smooth and protective layer.

Once dipped, lightly press the clear powder down with a silicone tool or your fingertip wrapped in plastic to help flatten any loose particles and ensure an even surface. Tap off excess powder and brush away any remaining dust.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Violet Sand + Mermaid + Crystal Clear' dipping powder. Have fun with your beautiful nails!