Violet Sand + Crystal White + Crystal Clear

Products used:

Step-by-step instructions for applying "Violet Sand + Crystal White + Crystal Clear" Dipping Powder

Materials:

Violet Sand Dipping Powder
Crystal White Dipping Powder
Crystal Clear Dipping Powder
Base coat
Activator
Top coat
Nail file and buffer
Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin, even layer of Base Coat to the entire nail. The first coat should be quick and does not need to be too precise. Be careful not to touch the cuticles or surrounding skin, as this can cause lifting and affect adhesion.

For the thumb and ring fingers, apply base coat to the entire nail and dip fully into “Violet Sand.” Tap off excess powder and gently brush away loose particles. Apply a second thin layer of base coat and repeat the dip into “Violet Sand” to build a smooth, even color.

For the pointing (index) finger and pinky, apply base coat only to the tip of the nail, keeping the line clean and controlled to form a French tip shape. Dip that section into “Crystal White,” making sure the tip is evenly coated. Tap off excess and gently brush clean to define the smile line. If needed, repeat this step with a second thin layer of base coat to sharpen and brighten the tip.

Once the French tip is set, apply base coat to the remaining bare portion of the nail (the base area) and pour over or dip into “Crystal Clear.” This keeps the base transparent and creates a clean contrast with the white tip.

For the middle finger, apply base coat to the entire nail and dip fully into “Crystal Clear.” Tap off excess and brush clean to create a clear base. Apply another thin layer of base coat and, using a small, soft brush, draw petal-like strokes on the lower portion of the nail. Immediately dip into “Violet Sand” so the powder adheres only to those petal shapes. Tap off excess and gently brush clean.

Next, apply base coat again and draw similar petal strokes on the upper portion (opposite side) of the nail. Dip into “Crystal White” to create contrast between the two floral sections. Tap off excess and brush clean carefully to keep the shapes defined.

Be sure to cover the edges well, but avoid touching the surrounding skin to ensure proper adhesion and a clean, polished finish.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Violet Sand + Crystal White + Crystal Clear' dipping powder. Have fun with your beautiful nails!

Colors used

€10,00

Violet Sand Dipping Powder

€10,00

Crystal Clear Dipping Powder

€10,00

Crystal White Dipping Powder

Violet Sand + Crystal White + Crystal Clear

Step-by-step instructions for applying "Violet Sand + Crystal White + Crystal Clear" Dipping Powder

Colors used

Reading next