Products used:
Step-by-step instructions for applying "Sweet Pink Bling + Senorita + Crystal Clear" Dipping Powder
Materials:
- Sweet Pink Bling Dipping Powder
- Senorita Dipping Powder
- Crystal Clear Dipping Powder
- Base coat
- Activator
- Top coat
- Nail file and buffer
- Dusting brush or soft brush
Preparation
File your nails into the desired shape and gently push back your cuticles.
For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.
Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.
Do not apply oils or creams before use.
Step 1: Base coat
Start by applying a thin, even layer of base coat to each nail. For a sweet, feminine look, dip some nails into "Senorita" or "Sweet Pink Bling" dipping powder, making sure to hold your nail at a 90-degree angle while dipping for smooth and even coverage. Gently tap off the excess powder and use a soft brush to sweep away any loose particles around the edges and cuticle.
For the nails where "Sweet Pink Bling" was used as the base, apply another layer of base coat over the entire nail, then dip it into "Crystal Clear" dipping powder. This step encapsulates the color and locks in that pretty pink, giving it a smooth, glossy finish. Gently tap off the excess powder and use a clean brush to remove any leftover powder.
Be sure to cover the edges well, but do not touch the skin around the nail.
Step 2: Base Coat & Color Powder
Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.
Step 3: Activator Coat
Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.
Step 4: Filing & Polishing
Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.
Step 5: Activator Coat
Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.
Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.
Step 6: Top Coat
Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.
Step 7: Top Coat
Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.
And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Sweet Pink Bling + Senorita + Crystal Clear' dipping powder. Have fun with your beautiful nails!
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.