Step 1: Base Coat
Apply a thin, even layer of Base Coat to the entire nail. The first coat should be quick and does not need to be too precise. Be careful not to touch the cuticles or surrounding skin, as this can cause lifting and affect adhesion.
For the thumb, middle, and pinky nails, apply base coat to the entire nail and dip fully into “Silk Veil”. For the index and ring fingers, apply base coat to the entire nail, then use a fluffy brush to gently tap “Silk Veil” powder onto the tip of the nail, allowing the powder to softly scatter toward the middle for a faded ombré effect. Tap off excess powder and gently brush away any loose particles. Apply a second thin layer of base coat to all nails and repeat the full dips and the ombré brush tapping to build full opacity and a seamless blend. Brush clean thoroughly.
To protect the ombré fade and the solid colored nails, apply a smooth layer of base coat over the entire nail on all fingers and dip fully into “Crystal Clear”. This encapsulates the powders, smooths the surface, and adds a durable finish. Tap off the excess powder and brush away any loose particles.
Step 2: Base Coat & Color Powder
Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.
Step 3: Activator Coat
Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.
Step 4: Filing, Polishing & Nail Art
Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.
Once filed and smooth, use a white Nail Art Liner pen to draw delicate snowflakes over the ombré tips on the index and ring fingers. Leave the solid “Silk Veil” nails (thumb, middle, and pinky) as they are for a soft, snowy contrast. Allow the liner designs to dry completely before proceeding.
Step 5: Activator Coat
Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.
Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.
Step 6: Top Coat
Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.
Step 7: Top Coat
Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.