Sapphire Black + Reflective Purple

 

Products used:

- Glowdip starter set

- Colour: Sapphire Black

- Colour: Reflective Purple

Step-by-step instructions for applying "Sapphire Black + Reflective Purple" Dipping Powder

Materials:

• Sapphire Black Dipping Powder
• Reflective Purple Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Start by prepping your nails — file and shape them evenly, push back your cuticles, and buff the surface to remove any shine for better adhesion. Once prepped, apply a thin, even layer of base coat to the entire nail. Quickly dip your nail into “Sapphire Black” at a 90-degree angle to ensure smooth and full coverage. Tap off the excess powder and gently dust away any loose particles using a soft brush. Repeat this step once more to achieve a rich, opaque black base.

Next, apply a fresh, thin layer of base coat to the upper portion of the nail — this will create the base for your ombré effect. While the base coat is still tacky, take a small fluffy brush and pick up some “Reflective Purple” dipping powder. Gently tap the powder onto the upper part of the nail, focusing the color more heavily near the tip. Use soft, downward tapping motions to blend the purple into the black base, creating a seamless gradient transition between the two shades.

If you want a more intense shimmer, you can repeat the process — apply another thin layer of base coat on the upper half and lightly tap on more “Reflective Purple.” Be sure to blend carefully so that the transition remains soft and natural. Once you’re satisfied with the ombré blend, gently brush off the excess powder.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Sapphire Black + Reflective Purple' dipping powder. Have fun with your beautiful nails!