Sapphire Black + Bright Future + Crystal Clear

 

Products used:

- Glowdip starter set

- Colour: Sapphire Black

- Colour: Bright Future

- Colour: Crystal Clear

Step-by-step instructions for applying "Sapphire Black + Bright Future + Crystal Clear" Dipping Powder

Materials:

• Sapphire Black Dipping Powder
• Bright Future Dipping Powder
• Crystal Clear Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Start by applying a thin, even layer of base coat and dipping your nail into "Bright Future", a vivid and luminous shade that creates a bold foundation. Hold your nail at a 90-degree angle as you dip to ensure smooth and even coverage. Once the base is set, apply another layer of base coat to the upper portion of the nail, shaping it like a classic French tip. While the base coat is still tacky, dip the tip into "Sapphire Black", a deep, rich shade that adds striking contrast. Immediately after, take a soft brush and lightly fluff out the edge of the black powder to blend it downward into "Bright Future", creating a subtle gradient effect. After blending, apply base coat over the entire nail and dip into "Crystal Clear" to encapsulate the design and smooth the surface. Gently press the clear powder flat with a silicone tool or fingertip wrapped in plastic for an even finish. Once sealed, carefully reapply base coat to the tip and dip again into "Sapphire Black" to intensify the French tip and bring out its bold definition.

For the little finger and index finger, keep the design sleek and minimal by dipping directly into "Sapphire Black" after applying base coat, repeating for full opacity. This creates a cohesive yet eye-catching look, balancing the accent nails with the French tip ombré design.

 Gently tap off the excess powder and use a clean brush to remove any leftover powder.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Sapphire Black + Bright Future + Crystal Clear' dipping powder. Have fun with your beautiful nails!