Purplish Red + Senorita + Extra Day + Oatmeal - Sunset Sorbet Blend
Products used:
Step-by-step instructions for applying "Purplish Red + Senorita + Extra Day + Oatmeal" Dipping Powder
Materials:
- Purplish Red Dipping Powder
- Senorita Dipping Powder
- Extra Day Dipping Powder
- Oatmeal Dipping Powder
- Base coat
- Activator
- Top coat
- Nail file and buffer
- Dusting brush or soft brush
Preparation
File your nails into the desired shape and gently push back your cuticles.
For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file, before application.
Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.
Do not apply oils or creams before use.
Step 1: Base coat
Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.
Next, For the thumb and ring finger, dip the nail into the "oatmeal" dip powder. Tap off any excess powder and repeat the process to build a smooth, even layer. Paint one nail at a time and then dip directly into the powder before starting the next nail.
For the thumb and ring finger, dip the nail into the "oatmeal" dip powder. Tap off any excess powder and repeat the process to build a smooth, even layer.
For the design on the remaining fingers, take a powder brush and lightly dip it into the colors "Purplish Red," "Senorita," and "Extra Day." Gently tap the brush over specific areas of the nail to create a beautiful mixed design, blending the colors seamlessly. To fill in any uncolored sections, use the same brush, dip it back into "oatmeal," and softly tap it onto the uncovered parts. This will create a harmonious look between the mixed design and the neutral base.
Be sure to cover the edges well, but do not touch the skin around the nail.
Step 2: Base Coat & Color Powder
Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.
Step 3: Activator Coat
Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.
Step 4: Filing & Polishing
Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.
Step 5: Activator Coat
Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.
Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.
Step 6: Top Coat
Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.
Step 7: Top Coat
Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.
And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Purplish Red + Senorita + Extra Day + Oatmeal' dipping powder. Have fun with your beautiful nails!
Leave a comment