Extra Day + Lovely Pink + Fandango Pink + Green Fields + Neon Yellow

Products used:

Step-by-step instructions for applying "Extra Day + Lovely Pink + Fandango Pink + Green Fields + Neon Yellow" Dipping Powder

Materials:

Extra Day Dipping Powder
Lovely Pink Dipping Powder
Fandango Pink Dipping Powder
Green Fields Dipping Powder
Neon Yellow Dipping Powder
Base coat
Activator
Top coat
Nail file and buffer
Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Using a small, soft brush, lightly pick up your first color and gently tap it onto one half of the nail. Work softly and keep the layer thin to avoid bulk.

Using the same technique, pick up your second color and apply it to the other half of the nail, slightly overlapping into the first color. Begin blending the two shades together in the center using light tapping motions with the brush to create a soft, seamless transition rather than a harsh line.

Follow these pairings for each design:
– “Extra Day” + “Tangerine Orange”
– “Lovely Pink” + “Sweet Pink Bling”
– “Fandango Pink” + “Princess”
– “Green Fields” + “Haze Blue”
– “Neon Yellow” + “Pale Green”

Continue softly blending both sides until the center looks diffused and smooth. You can lightly add more of either color to balance the gradient, keeping the application thin and controlled.

Once the blend looks even, gently brush away excess powder without disturbing the design. If needed, apply another thin layer of base coat and repeat the blending process to intensify the colors.

Be sure to cover the edges well, but avoid touching the surrounding skin to ensure proper adhesion and a clean, polished finish.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Extra Day + Lovely Pink + Fandango Pink + Green Fields + Neon Yellow' dipping powder. Have fun with your beautiful nails!