Preparation

Begin by shaping your nails to your desired shape and gently pushing back the cuticles.

To ensure optimal adhesion, delicately roughen the surface of your natural nails using a buffer block or the fine side of a file. It's crucial to remove any invisible cuticle and skin debris to prevent lifting.

Avoid applying oils or creams prior to beginning the process.

Step 1: Base Coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Next, immediately dip your finger gently, at a 45-degree angle, into the color powder "Diamond White,"  "Smooth Avocado,"  or "Sunset Lover," and tap off the excess powder. Then remove the excess powder by lightly brushing over the surface. Repeat the process on the rest of your nails. Paint one nail at a time and then dip directly into the powder before starting the next nail.

Apply a thin layer of base coat to one nail. Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

 Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat the activator coat application process to further seal and optimize layer adhesion. Allow the coat to dry for at least two minutes, ensuring the surface is clean to prevent contamination.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.