Vanilla Dream + Crystal White + Crystal Clear

6 mai 2026

0 commentaires

Vanilla Dream + Crystal White + Crystal Clear

Products used:

- Glowdip starter set

- Colour: Vanilla Dream

- Colour: Crystal White

- Colour: Crystal Clear

Step-by-step instructions for applying "Vanilla Dream + Crystal White + Crystal Clear" Dipping Powder

Materials:

Vanilla Dream Dipping Powder
Crystal White Dipping Powder
Crystal Clear Dipping Powder
Base coat
Activator
Top coat
Nail file and buffer
Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin, even layer of Base Coat to the entire nail. The first coat should be quick and does not need to be too precise. Be careful not to touch the cuticles or surrounding skin, as this can cause lifting and affect adhesion.

For the middle and pointing (index) fingers, apply a thin layer of base coat and, using a small, soft brush, draw three petal shapes on the upper right corner of the nail. Keep the strokes light and slightly curved to resemble soft petals. Immediately dip the nail into “Vanilla Dream” so the powder adheres only to those petal shapes. Tap off excess and gently brush clean.

Apply another thin layer of base coat and draw smaller petal strokes overlapping the first set, adding dimension to the design. Dip the nail into “Crystal White” to create contrast with the base petals. Tap off excess and brush clean carefully to keep the layered petals defined.

Next, apply a small amount of base coat to the upper right area where the “Crystal White” petals are placed. Using tweezers, carefully place small pieces of silver foil onto that section. Press lightly to secure the foil without spreading it too far beyond the design.

For the remaining nails, apply base coat to the entire nail and dip fully into “Vanilla Dream.” Tap off excess powder and gently brush away loose particles. Apply a second thin layer of base coat and repeat the dip into “Vanilla Dream” to build a smooth, even color.

To finish, apply a thin, even layer of base coat over all nails and dip fully into “Crystal Clear.” This encapsulates the design, smooths the surface, and protects all layers underneath for a glossy, long-lasting finish.

Be sure to cover the edges well on all nails, but avoid touching the surrounding skin to ensure proper adhesion and a clean, polished result.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Vanilla Dream + Crystal White + Crystal Clear' dipping powder. Have fun with your beautiful nails!