Dark Roast + Crystal Clear + Coconut

 

Products used:

- Glowdip starter set

- Colour: Dark Roast 

- Colour: Crystal Clear 

- Colour: Coconut

Step-by-step instructions for applying "Dark Roast + Crystal Clear + Coconut" Dipping Powder

Materials:

• Dark Roast Dipping Powder
• Coconut Dipping Powder
  
• Crystal Clear Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin, even layer of Base Coat to the entire nail. The first coat should be quick and does not need to be overly precise. Be careful not to touch the cuticles or surrounding skin, as this can cause lifting and affect adhesion.

For the base, apply base coat and dip each nail into either “Coconut” or “Dark Roast.” Tap off excess powder and gently brush away loose particles. Apply a second thin layer of base coat and repeat the dip into the same shade to build an even, smooth base. Allow the layers to set and brush clean before moving on.

For the nails using “Coconut,” apply base coat to only an angled half of the nail, then dip that section into “Coconut” if needed to refine the shape. After shaping the angled section, apply base coat over the entire nail and dip fully into “Crystal Clear.” This step locks in the base and creates a smooth surface for the design.

Once the nail is set, apply a thin layer of base coat where you want the cow print design. Using a dotting tool dipped in base coat, create irregular spots across the nail to mimic cow print patterns. Keep the shapes organic and uneven for a more natural look.

Immediately dip the nail into “Dark Roast” so the powder adheres only to the dotted areas. Tap off excess and gently brush clean, making sure not to disturb the shape of the spots.

Be sure to cover the edges well on all nails, but avoid touching the surrounding skin to ensure proper adhesion and a clean, polished finish.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Dark Roast + Crystal Clear + Coconut' dipping powder. Have fun with your beautiful nails!