Byzantine + Sapphire Black

 

Products used:

- Glowdip starter set

- Colour: Byzantine

- Colour: Sapphire Black

Step-by-step instructions for applying "Byzantine + Sapphire Black" Dipping Powder

 

Materials:

• Byzantine Dipping Powder
• Sapphire Black Dipping Powder
  
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Start by applying a thin, even layer of base coat to the entire nail and immediately dip into “Byzantine”, a rich, vibrant shade that creates the perfect base. Hold your nail at a 90-degree angle to ensure smooth, even coverage, then gently tap off excess powder and brush away loose particles around the cuticle and edges.

Once the base is set, apply another thin coat of base liquid to the upper portion of the nail—about one-third to halfway down the surface. Dip just that section into “Sapphire Black”, focusing on the tip of the nail. While the powder is still fresh, use a soft, fluffy brush to gently blend the dark shade downward into “Byzantine,” creating a smooth ombré effect. Work in light strokes to soften the transition between the two colors. Repeat the same process—base coat, partial dip into “Sapphire Black,” and careful blending—for a more intense gradient and deeper dimension. Gently tap off the excess powder and use a clean brush to remove any leftover powder.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Byzantine + Sapphire Black' dipping powder. Have fun with your beautiful nails!