Senorita + Green Fields + Fuchsia Pink + Oatmeal

 

Products used:

- Glowdip starter set

- Colour: Senorita

- Colour: Green Fields

- Colour: Fuchsia Pink

- Colour: Oatmeal

Step-by-step instructions for applying "Senorita + Green Fields + Fuchsia Pink + Oatmeal" Dipping Powder

Materials:

• Senorita Dipping Powder
  
• Green Fields Dipping Powder
• Fuchsia Pink Dipping Powder
• Oatmeal Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of base coat on your pointing finger, thumb, and pinky, then dip each into Senorita, a vibrant reddish-pink that sets the tone for your solid color nails. Tap off the excess powder and gently brush away loose particles. Repeat this step for full opacity if desired.

Now for the tie-dye design, begin with a base coat and immediately dip your nail into Oatmeal, a soft, neutral shade that works perfectly as a background. Once the powder sets, tap off excess and lightly brush off any stray particles.

Next, while the nail is still slightly tacky or after reapplying base coat, take a small fluffy brush and dip into Green Fields. Gently tap the brush over the nail in scattered spots to start building your tie-dye effect. Repeat the same method with Senorita, placing dabs near the Green Fields areas but leaving some space for contrast. Finally, use a clean brush to apply Fuchsia Pink the same way—tap softly to blend while maintaining a swirled, organic pattern.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Senorita + Green Fields + Fuchsia Pink + Oatmeal' dipping powder. Have fun with your beautiful nails!