Soft Lila + Pink Lemonade + Crystal Clear

 

Products used:

- Glowdip starter set

- Colour: Soft Lila 

- Colour: Pink Lemonade

- Colour: Crystal Clear

Step-by-step instructions for applying "Soft Lila + Pink Lemonade + Crystal Clear" Dipping Powder

 

Materials:

• Soft Lila Dipping Powder
• Pink Lemonade Dipping Powder
  
• Crystal Clear Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Dip the nail fully into either “Pink Lemonade” or “Soft Lila”, holding the finger at a 90-degree angle for smooth, even coverage. Tap off excess powder and use a soft brush to remove any remaining particles around the cuticle and edges. Allow this base layer to set before continuing.

For the half-and-half design, apply base coat to one half of the nail only. You can create a clean vertical split down the center or a soft diagonal, depending on the look you prefer. While the base coat is still wet, dip that section into “Pink Lemonade.” Gently tap off excess powder and brush away loose particles. Once set, apply base coat to the remaining half of the nail and dip it into “Soft Lila,” ensuring the two colors meet cleanly without overlapping. This controlled application helps maintain a crisp color-block effect.

To perfect coverage and durability, repeat the half-and-half step once more, following the same placement to build opacity and balance between the two shades. Make sure the layers remain thin and even to avoid bulk. After brushing away excess powder, apply a final layer of base coat over the entire nail to encapsulate the design.

Dip the full nail into “Crystal Clear” to seal and protect the color layers beneath. This step smooths the surface and locks in the design for a polished finish.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Soft Lila + Pink Lemonade + Crystal Clear' dipping powder. Have fun with your beautiful nails!