Dark Roast + Stardust

 

Products used:

- Glowdip starter set

- Colour: Dark Roast

- Colour: Stardust

Step-by-step instructions for applying "Espresso Noir + Glow of the Sky" Dipping Powder

Materials:

• Dark Roast Dipping Powder
• Stardust Dipping Powder
  
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Holding your finger at a slight angle, dip the entire nail into your chosen shade—either “Dark Roast” or “Stardust” Tap off excess powder and allow the layer to settle before brushing away loose particles with a soft, fluffy brush.

Apply a second thin layer of base coat, but this time start slightly closer to the cuticle than the first application. Dip the nail into the same shade again, building color intensity while maintaining thin, even layers. This layered approach ensures strength without unnecessary bulk and helps create a smooth cuticle blend. Tap away excess powder and gently brush off residue. Repeat this step for a third layer if you want extra durability or deeper saturation, especially useful for longer nails or high-impact wear.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Dark Roast + Stardust' dipping powder. Have fun with your beautiful nails!