Persian Pink + Soft Lila

Products used:

- Glowdip starter set

- Colour: Persian Pink

- Colour: Soft Lila

Step-by-step instructions for applying "Persian Pink + Soft Lila" Dipping Powder

Materials:

• Persian Pink Dipping Powder
• Soft Lila Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

Start by dipping your nails into "Soft Lila" to create a smooth, pastel-toned base. Ensure full coverage by applying an even layer of base coat beforehand, then dip the nail straight into the powder at a 90-degree angle. Tap off any excess powder and use a soft brush to gently sweep away loose particles without disturbing the surface. Once the base is set and clean, apply another thin, even layer of base coat over the entire nail—this will allow the ombré design to stick smoothly.

While the base coat is still wet, take a small, fluffy eyeshadow or nail art brush, and hold it at a 45-degree angle. Pick up a small amount of "Persian Pink" powder on the brush and begin gently dabbing it onto the tip or side of the nail, depending on where you want the gradient to start. Use soft, tapping motions, gradually working the powder toward the center of the nail to blend it into the "Soft Lila" base. Avoid dragging or pressing too hard to maintain a seamless transition between the two colors.

You can build up the intensity by adding more "Persian Pink" in layers, but always use light touches to preserve the gradient. After the ombré effect is complete, tap off any remaining powder and use a clean brush to sweep away loose particles.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Persian Pink + Soft Lila' dipping powder. Have fun with your beautiful nails!