Fandango Pink + Mermaid + Crystal Clear

Products used:

Step-by-step instructions for applying "Fandango Pink + Mermaid + Crystal Clear" Dipping Powder

Materials:

Fandango Pink Dipping Powder
Mermaid Dipping Powder
Crystal Clear Dipping Powder
Base coat
Activator
Top coat
Nail file and buffer
Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin, even layer of Base Coat to the entire nail. The first coat should be quick and does not need to be too precise. Be careful not to touch the cuticles or surrounding skin, as this can cause lifting and affect adhesion.

Dip all nails fully into “Fandango Pink.” Tap off excess powder and gently brush away loose particles. Apply a second thin layer of base coat and repeat the dip into “Fandango Pink” to build a smooth, even base color. Brush clean thoroughly and allow the layer to set before moving on to the next step.

Once the pink base is complete, apply a fresh thin layer of base coat over the entire nail. While the surface is still tacky, lightly apply “Mermaid” on top of “Fandango Pink.” You may either sprinkle it softly across the nail or gently press it onto the surface for a more even shimmer effect. Focus on keeping the Mermaid layer thin and evenly distributed so the iridescent finish remains smooth and reflective.

After applying “Mermaid,” gently wrap the finger with a piece of clear tape and lightly press around the nail surface. This helps flatten the Mermaid particles into the base layer, reducing texture and creating a smoother, more glass-like shimmer effect. Carefully remove the tape without disturbing the powder underneath.

Brush away any loose excess powder gently while keeping the Mermaid layer intact and evenly spread across the nail.

To finish, apply a thin, even layer of base coat over the entire nail and dip fully into “Crystal Clear.” This encapsulates the shimmer, smooths the surface, and protects all layers underneath for a glossy, long-lasting finish.

Be sure to cover the edges well on all nails, but avoid touching the surrounding skin to ensure proper adhesion and a clean, polished result.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Fandango Pink + Mermaid + Crystal Clear' dipping powder. Have fun with your beautiful nails!